HRC55 i solidt hårdmetal 3.175*R0.75*15*38 TiALN-Belagt Taper Bolden Næse End Mill,kegle fræser,Sfæriske træbearbejdning router bit

kr38.03

Varebeskrivelse


Made of: imported tungsten steel carbide from Germany Tapered Ball Nose End Mill / Cone Cutters:

Flute(s): 2 Flutes Worked material HRC: 0~55 Degre Coating: Tialn Shank Diameter(SHK): 3.175mm Overall Length(OVL): 38mm Suitable For: Cutting, end milling, slotting on: Hard wood, plywood, etc Features: Use top quality imported tungsten steel carbide from Germany; Excellent chip removal effect!High surface finish, excellent work!Long service life

​ Models Radius Cutting Edge length Shank Diameter Overall length Link to buy (R) (L1) (d1) (L) R0.25xD3.175x15x38L 0.25 15 3.175 38 R0.5xD3.175x15x38L 0.5 15 3.175 38 R0.75xD3.175x15x38L 0.75 15 3.175 38 R1.0xD3.175x15x38L 1 15 3.175 38 R0.25xD4x20.5x50L 0.25 20.5 4 50 R0.5xD4x20.5x50L 0.5 20.5 4 50 R0.75xD4x20.5x50L 0.75 20.5 4 50 R1.0xD4x20.5x50L 1 20.5 4 50 R0.25xD4x15x50L 0.25 15 4 50 R0.5xD4x15x50L 0.5 15 4 50 R0.75xD4x15x50L 0.75 15 4 50 R1xD4x15x50L 1 15 4 50 R0.25xD6x20x50L 0.25 20 6 50 R0.5xD6x20x50L 0.5 20 6 50 R0.75xD6x20x50L 0.75 20 6 50 R1xD6x20x50L 1 20 6 50 R0.25xD6x30.5x75L 0.25 30.5 6 75 R0.5xD6x30.5x75L 0.5 30.5 6 75 R0.75xD6x30.5x75L 0.75 30.5 6 75 R1xD6x30.5x75L 1 30.5 6 75 R1.5xD6x30.5x75L 1.5 30.5 6 75 R2xD6x30.5x75L 2 30.5 6 75 R2xD6x60x100L 2 60 6 100 R0.5xD8x47x85L 0.5 47 8 85 R1.0xD8x47x85L 1 47 8 85 R1.5xD8x47x85L 1.5 47 8 85 R2.0xD8x47x85L 2 47 8 85 R0.5xD8x60x100L 0.5 60 8 100 R1.0xD8x60x100L 1 60 8 100 R1.5xD8x60x100L 1.5 60 8 100 R2xD8x60x100L 2 60 8 100 R2xD10x70x110L 2 70 10 110 R2xD12x80x120L 2 80 12 120 R1.5xD12x80x120L 1.5 80 12 120

Produkt Anmeldelse


Der er ingen kundeanmeldelser endnu.

Tilføj en anmeldelse af varen

Yderligere oplysninger


Materiale I Solidt Hårdmetal
Belægning TiAIN
Diameter 3.175 mm
Mærke hardwell
Samlet Længde 38mm
Model-Nummer taper bolden næse næse endefræsere
Type Endefræsere
Oprindelse KN(Oprindelse)

Relaterede varer